will a thunder fighter work with a ms controler ??

micro_man · Post by **micro_man** » Wed Aug 20, 2003 11:34 am

i have recently traded a body for a complete 27 mhz thunder fighter chassis and a body , but will a 27 mhz ms controler work with this car ? the guy said it should but i wana know for sure. thanks for your time ......matt

hogjowlz · Post by **hogjowlz** » Wed Aug 20, 2003 11:39 am

thunder fighter? you mean thunder charger? im pretty sure they work but i forget. at worst you will have to reverse the steering wires.

micro_man · Post by **micro_man** » Wed Aug 20, 2003 11:43 am

na i mean thunder fighter its a clone from walmart in canada

hogjowlz · Post by **hogjowlz** » Wed Aug 20, 2003 11:49 am

strange

from experience with clone brands, most will work with ms controllers with either a slight modification or none at all. some do not work period tho.

micro_man · Post by **micro_man** » Wed Aug 20, 2003 12:53 pm

it dosent matter now cus i just pcb swaped my wecked ms pros pcb into my rally racer and i'll just put the 57 mhz board from that in it.

hogjowlz · Post by **hogjowlz** » Wed Aug 20, 2003 1:09 pm

Stoli · Post by **Stoli** » Wed Aug 20, 2003 1:11 pm

all controlers work with all bits except the turbo bossted ones. I have 1 controller for all my 27's and one for all my 49's. The one thing I found was fwrd is rev and visa-versa for some cars.

hogjowlz · Post by **hogjowlz** » Wed Aug 20, 2003 1:21 pm

ive seen a few brands of clones that are incompatable with regular boards. me and my friend had two 49s and neither would control eachother and when we ran em both at the same time they cancelled eachother out and neither worked.

micromatch · Post by **micromatch** » Wed Aug 20, 2003 1:27 pm

yea i was thinkin of putting a clone pcb in a ms i was thinkin it might work good

micro_man · Post by **micro_man** » Wed Aug 20, 2003 1:34 pm

thanks for the info guys

hogjowlz · Post by **hogjowlz** » Wed Aug 20, 2003 1:39 pm

micromatch wrote:yea i was thinkin of putting a clone pcb in a ms i was thinkin it might work good

none of my microser chassis have microsizer pcbs in them. i like range.

micromatch · Post by **micromatch** » Wed Aug 20, 2003 4:21 pm

yeai think i might do it today now that i ditched my old soldering iron and got a new one