im gona pull a noxorc

hogjowlz · Post by **hogjowlz** » Fri Aug 22, 2003 10:57 am

and tell you about the body i just painted and not show anyone any pics.

i got a few cans of duplicor touch up paint from walmart(thanks dave) last week and have practiced on a few bodies. the first was the red 350z that comes in the ms kit and it turned out pretty good other than paint bleedingg through the tape on part of the rear. so i said screw it and decided to work on perfecting single tone paint jobs instead of crazy mask stuff.

well i busted out one of my thundercharger truck bodies and figured oh well "you cant polish a turd" and well i polished her up real pretty. kinda blue green color(like after eating superman icecream). i gota say that duplicolor paint goes on real smooth and thin.i painted the windows yellow from underneath and painted the spare tire and front grill thing yellow to match. it looks a lot sweeter than it did before with no major blemishes!! which is a major first for me.

payaso · Post by **payaso** » Fri Aug 22, 2003 1:16 pm

Well

???

Show your tits..

silla

hogjowlz · Post by **hogjowlz** » Fri Aug 22, 2003 1:35 pm

SuperFly · Post by **SuperFly** » Fri Aug 22, 2003 2:42 pm

I wanna see how you're going to do the mosfet mod with JBWeld.

hogjowlz · Post by **hogjowlz** » Fri Aug 22, 2003 2:48 pm

now we all know that jbweld is non conductive at normal voltages

ssi · Post by **ssi** » Fri Aug 22, 2003 3:18 pm

hay am on the edge of me seet

post a pick of the shell. plzz

ph2t · Post by **ph2t** » Fri Aug 22, 2003 5:05 pm

hogjowlz wrote:now we all know that jbweld is non conductive at normal voltages

yer daft bugger, lol!

ph2t.

hogjowlz · Post by **hogjowlz** » Fri Aug 22, 2003 5:58 pm

can i have a translation from broken australian english to broken american english?

Post by **CaboWabo** » Fri Aug 22, 2003 6:05 pm

hogjowlz wrote:can i have a translation from broken australian english to broken american english?

http://www.billburr.com/videoArchive.htm
under "stand up" click on "spell checker"

hogjowlz · Post by **hogjowlz** » Fri Aug 22, 2003 7:21 pm

aint workin

Post by **CaboWabo** » Fri Aug 22, 2003 7:27 pm

you must be missin somefin - works for me

Stoli · Post by **Stoli** » Fri Aug 22, 2003 7:42 pm

works for me too. MAy need an extra pug in I did.

noxorc · Post by **noxorc** » Thu Aug 28, 2003 8:28 am

so, when are we going to see these Pictures?

is JBWeld conductive?

I missed this thread....There are just so many new ones...I'm missing on.

hogjowlz · Post by **hogjowlz** » Thu Aug 28, 2003 9:25 am

i was gona borrow my friends camera(woman took ours to a bar and someone stepped on it) but he couldnt find it so this weekend fersure. ill have about 4 rides to snap by then.

and about the jbweld conductivity. at any kind of voltage that bits use no it is not conductive. at high voltage im sure it would be.

crazydave · Post by **crazydave** » Thu Aug 28, 2003 9:42 am

Glad to hear that Duplicolor is working out for someone beside me, I love that stuff.

To see if JBweld has any conductivity stick the probes of you ohm meter in it. If you get a zero reading, then no it's not conductive at any voltage, but if it has even the slightest bit of positive reading then maybe it is conductive at higher voltages.

You know if I put one probe of my volt meter on my wrist, and the other on my finger tip, my hand reads .16 volts, but that the only place on my body where I can get a voltage reading. Try it to see if it works for you, or if I'm just a freak.

Ok, now hurry up and post them pics, I can't keep rambling on like this to keep myself entertained until then.