Video: A serious thrash-fest!
- betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
yes tmp, you is a very sick individual.............my kinda people! for the 'spec' heads out there.....
s2000 monster:
enertec micro charger chassis with a whole buncha bouncy crap installed,
modified tomy shell,
'tunerz' wheels and custom foamies tyres,
dual 1/3AAA 200mah nimh,
micro amps fetted tomy pcb,
perfection 3.5? (purple cap),
7.1:1 gearset.
believe it or not, it was actually running a little slow that day, needed a good clean and lube after a recent bush adventure! the poisonous ant's acid blood tends to screw with the gears. but they're not as big a problem as hogjowlz makes out, the kung fu ninja death squad mortar launching red back spiders keep their numbers down! CRIKEY!!!!
s2000 monster:
enertec micro charger chassis with a whole buncha bouncy crap installed,
modified tomy shell,
'tunerz' wheels and custom foamies tyres,
dual 1/3AAA 200mah nimh,
micro amps fetted tomy pcb,
perfection 3.5? (purple cap),
7.1:1 gearset.
believe it or not, it was actually running a little slow that day, needed a good clean and lube after a recent bush adventure! the poisonous ant's acid blood tends to screw with the gears. but they're not as big a problem as hogjowlz makes out, the kung fu ninja death squad mortar launching red back spiders keep their numbers down! CRIKEY!!!!
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
- mekinhux
- bitPlaya'
- Posts: 190
- Joined: Wed Dec 17, 2003 11:07 am
- Location: Portugal
- Contact:
-
- bitPimp
- Posts: 1979
- Joined: Tue Mar 25, 2003 6:33 am
- Location: taco city
We'll I had a bit of a hickup. It's seems that I burnt out the fets on the PCB. I guess it was gonna happen. I measured the current going to the motor from the mosfet H-Bridge and it was 700mA !!!! Now this was when the fets were buggered so they would of been of quite high resistance versus normal operation. I'll take another measurement soon once I fix the H-Bridge but I believe that with a 4.8V source the motor is sinking over 1A normally!!!! That's a hell of a lot of current for such a small setup!
Anyways, mini z fet stacking is all the rage, so why can't it be for bits as well? lol.....
Here's a triple stack of IRLML2502 mosfets on a clone bit PCB.
This fucker is now very fast and has killa torque, the fets don't even break a sweat now!
ph2t.
Anyways, mini z fet stacking is all the rage, so why can't it be for bits as well? lol.....
Here's a triple stack of IRLML2502 mosfets on a clone bit PCB.
This fucker is now very fast and has killa torque, the fets don't even break a sweat now!
ph2t.