New Project Car

backdrift · Post by **backdrift** » Sun Mar 13, 2005 2:45 pm

Specs;
It will be full alloy
V2
CF Xmodsource Chassis
Custom motors
2 Li-Poly
Full bearings
Full alloy Cups
Tight Turns

Most of this stuff is on its way.. Some is pictures

And more.. Speedchecker pictures to come!

JDM-R34 · Post by **JDM-R34** » Sun Mar 13, 2005 2:52 pm

Hottness!

backdrift · Post by **backdrift** » Sun Mar 13, 2005 3:40 pm

Spanx..

Stoli · Post by **Stoli** » Sun Mar 13, 2005 5:32 pm

Can someone tell me what exact size of nut to get for xmod wheels. I see he has some on this one. I keep breaking the plastic ones off but have no clue as to what size metal to buy?

backdrift · Post by **backdrift** » Sun Mar 13, 2005 5:38 pm

Um.. Look around for Mini-z or Xmod nuts.. I dont know there size, sorry!

Bird · Post by **Bird** » Sun Mar 13, 2005 5:51 pm

You want 2mm nylock nuts... same size for xmods and mini z...

Hold off a bit before doing anything though, 219 had a bunch of sets he was letting go cheap... I can't get him to answer his cell right now, he must be at work... but I'm pretty sure he still has a few sets.

backdrift · Post by **backdrift** » Sun Mar 13, 2005 6:34 pm

Yeah, thanks bird.. I was about to edit my other post and say there 2MM i looked them up on ebay.. Thanks though

Stoli · Post by **Stoli** » Sun Mar 13, 2005 7:34 pm

well could I not just buy 2MM fine thread nuts for Home depot? or a hardware store?

betty.k · Post by **betty.k** » Mon Mar 14, 2005 5:15 am

you can and they work but they will work themselves loose and fall off.
i recomend these type

http://www.rcmart.com/catalog/product_i ... cts_id=984

the flanged shape holds xmod rims nice and snug.

backdrift, that's gonna be a smooth ride, and props on that pic too!

backdrift · Post by **backdrift** » Mon Mar 14, 2005 4:17 pm

Thanks again, got another for yall!

HAPPY MOTHER OF LI-PO!

And i forgot, i have a 61mph motor that will be in there for speed runs, and just plain bragging rights.And i also have PNS01,2 and 3 on order. Shall be here shortly..

-Backdrift

cj · Post by cj » Mon Mar 14, 2005 5:36 pm

backdrift wrote:Specs;
It will be full alloy
V2
CF Xmodsource Chassis
Custom motors
2 Li-Poly
Full bearings
Full alloy Cups
Tight Turns

Most of this stuff is on its way.. Some is pictures

And more.. Speedchecker pictures to come!

OK where are you getting your ALLOY and why didn't you ask me?

backdrift · Post by **backdrift** » Mon Mar 14, 2005 5:38 pm

LOL.. RCMart, and um i got a discount on it all from a large order of other stuff.. 50 dollars off the 320 for all the GPM actully. Ill buy all my future GPM off of you though!

cj · Post by cj » Mon Mar 14, 2005 7:21 pm

backdrift wrote:LOL.. RCMart, and um i got a discount on it all from a large order of other stuff.. 50 dollars off the 320 for all the GPM actully. Ill buy all my future GPM off of you though!

Good luck on the front arms. Also find a #2 nylon screw to insulate your antenna on that rear deck.

viperdout · Post by **viperdout** » Mon Mar 14, 2005 7:49 pm

I think CJ can beat RC Mart as of now. I just wish he had had the driveshaft guides in stock when I ordered! BTW, I can still outrun you.

It's very sweet in all seriousness.

backdrift · Post by **backdrift** » Tue Mar 15, 2005 1:52 pm

Im not using GPM decks, top cad's actully or i might swap out for a CXP one piece.. Which i dont know how that copes with the xmodsource cf chassis which is on its way.. And yeah viperdout, you will still win but mines more practical for everyday use! Its like have a drag car as an everyday driver, your brushless that is, compared to me having an economical civic

bitPimps.lixlink.com

New Project Car

New Project Car

Re: New Project Car