Moded Ferrari Again wid a update #6
- Finks
- bitPimp
- Posts: 2174
- Joined: Tue Jan 06, 2004 10:31 am
- Location: Red Sox and Pats Nation BITCHES!
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
I am working out some problems especially with the headlights (the covers) and I don’t want to post any more pictures because It will give a away the color and that’s a surprise. I think I have the light thing worked out. (almost)?
I also glued on the tail fin on the back and well hated it I tried different ones and well they all sucked! So I had to repair the damage made by all the glue and crap! This one is taking a little longer then expected. Once I got past the part the Miva did things really slowed down!
I also glued on the tail fin on the back and well hated it I tried different ones and well they all sucked! So I had to repair the damage made by all the glue and crap! This one is taking a little longer then expected. Once I got past the part the Miva did things really slowed down!
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
Well I actualy worked on it some more and plan to do some more this weekend. I figured out the lights I wanted to try something other then what Miva did but in the end I went with some Plexi Glass for the lights but the rear lights are still up in the air. If any one has some ideas for the back lights send them my way!
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
Ok finally an update I had some time to work on this car this weekend and got some more done! Ok I can finally reveal the paint Walla a color to make SG stand up and drool!
I picked Model Masters “Green Go” by Testors its actually a Dodge color but I think it works real well on the Ferrari.
I finally got the headlight inserts finished I had to Dremel like hell but got them to fit in the slots (I don’t have them in for the picture as I have more to do before gluing them in place. The motor is almost finished and ready to be glued into place. I still have to finish the back light bar and cut to fit. But I am getting real close to being done. Hope ya’ll like the color!
I picked Model Masters “Green Go” by Testors its actually a Dodge color but I think it works real well on the Ferrari.
I finally got the headlight inserts finished I had to Dremel like hell but got them to fit in the slots (I don’t have them in for the picture as I have more to do before gluing them in place. The motor is almost finished and ready to be glued into place. I still have to finish the back light bar and cut to fit. But I am getting real close to being done. Hope ya’ll like the color!
Last edited by steelwoolghandi on Sun Sep 25, 2005 9:24 pm, edited 2 times in total.
- Sporttracguy
- bitNinja
- Posts: 507
- Joined: Thu May 12, 2005 4:25 pm
- Location: Seattle, Washington USA