Triple Cell Modification
by RobotGT
Materials/Tools needed:
- 3 of the some type of Bit/Zip/MS batterys
- Wire
- Electrical tape
- Soldering iron/pen/gun
- Solder
- Something to remove a battery (EG:Smal screwdriver,guitar pick, and so on)
Step 1: Solder a wire between the – end of cell 2 to the + end of cell 3.
Step 2: Solder a wire to the + end of cell 2.
Step 3: Solder a wire to the – end of cell 3.
Step 4: Tape (or solder then cover with tape for extra hold) the wire from the + end of cell 2 to the – end of cell 1. Make shure the whole – end of cell 1 is covered with tape.
Step 5: Slide the cell 1 into the battery campartment CAREFULLY.
Step 6: Use a slim screwdriver or something real skinny and hard to push the wire coming off of the – end of cell 3 in between the tape and the – tab for the battery compartment.
Step 7: Modify your remote as mentioned here in CaboWabo’s Dual Cell Mod.
Step 8: Drive lick a maniac!
